Sealclear - 1 Gallon Can

About this product

Sealoflex Sealclear is a siloxane emulsion that produces a high performance water repellent coating. Excellent adhesion to concrete, brick, masonry and natural and synthetic stone. Sealoflex Sealclear cures to a tough elastomeric polysiloxane film. Sealoflex Sealclear is a water borne product which yields a transparent coating and provides immediate long-lasting water repellency. Sealoflex Sealclear dramatically reduces capillary water absorption, yet is permeable to water vapor, allowing the substrates to "breathe". Sealoflex Sealclear is "UV transparent" - virtually impervious to UV degradation of the siloxane coating. Advantages: Prevents mildew, surface staining, lime leaching and salt efflorescence Chemically bonds to substrate and will not break down even under harsh UV conditions Dries tack free and will not retain dirt Allows substrate to breathe and won't trap moisture Dries completely clear and will not leave a glossy finish Low molecular weight which provides excellent penetration depth making it ideally suited for areas subject to abrasion such as patios, walkways and pavers Great alkaline resistance allows the product to be applied to new construction Uses: Sealclear is recommended as an external masonry and cement water repellent for vertical and non-traffic able horizontal surfaces. It is particularly suitable for highly alkaline surfaces such as brick, walls, concrete, stucco, limestone, natural and synthetic stone. Application: It is advisable to treat the entire surface and not patch. This prevents water finding new points of entry at the edges of the treated surface. Stir or shake the contents of the container well before using. Apply by brush, roller or sprayer. Ensure Sealclear saturates the surface completely. Use a pressure of less than 5 psi to avoid misting. Apply 2 coats for maximum protection. Sealclear will reach full cure about 24 hours after the last coat is applied, at an ambient temperature of 75°F.