FTR 101 Sealant - 11 Oz. Tube

About this product

FTR 101 is a general purpose, one component, extremely elastic, moisture curing polyether sealant. It typically requires no priming to bond to many materials including FiberTite, concrete, metal, masonry, wood and fluoropolymer coatings. The FiberTite FTR 101 Sealant is designed for use with FiberTite membranes in conjunction with terminations, drain seals and metal flashing. It exhibits excellent resistance to weather, stress, movement, water and many environmental chemicals while maintaining adhesion, cohesion and elasticity. FiberTite FTR 101 Sealant is an easy flowing, moisture cure polyether sealant, applied with an industrial caulking gun and produces a flexible joint/seal with good adhesion to a variety of construction surfaces including sheet metal, masonry, wood, aluminum, brick and concrete. Surfaces to receive FiberTite FTR 101 Sealant must be structurally clean, sound, moisture, dry, free of dirt, oil, loose particles, grease, asphalt, paint, wax, rust, waterproofing or curing and parting compounds. In cool weather, store cartridges at room temperatures for at least 24 hours before using. Advantages: Cannot shrink 100% solids content. Does not contain any solvent 30 minute skin time at 70 F Odor free +/- 50% joint movement Paintable in 24 hours Bonds to Kynar coated metal Won't outgas on damp surfaces Bonds well to KEE membrane Non-slump Easy to gun and tool 1 year shelf life Service temperature -40°F to 200°F Will not stain limestone wall panels or copings Elongation > 700% Shear strength 150 psi